Skip to content
Accounting and finance ⇄ Human resources

Logisense to Oracle Fusion Cloud HCM integration — real-time, two-way sync

Keep Logisense and Oracle Fusion Cloud HCM in sync without custom scripts. Cut weeks of integration work, eliminate silent data drift, and give your team a single, reliable source of truth.

  • SOC 2 and 6 other compliance frameworks
  • POC with real engineers in minutes

Adopted by fast-scaling companies moving mission-critical data in real time

Case study
Migrated from MuleSoft
Case study
Migrated from Celigo
Migrated from Heroku Connect
Migrated from Matillion
Case study
Migrated from Fivetran
Case study
Migrated from Celigo
Why teams connect Logisense and Oracle Fusion Cloud HCM

Keep the employee, department, and cost records that Logisense and Oracle Fusion Cloud HCM share consistent in real time, so the finance system and the people system stop drifting apart.

Logisense runs the money side of the company: who gets paid, what it costs, and which part of the business the cost belongs to. Oracle Fusion Cloud HCM runs the people side: who works here, which team they sit in, and how their employment changes over time. The two overlap on the same people and the same org structure, because every employee is also a payee and every department is also a cost center. When that overlap is maintained by hand, a new hire, a transfer, or a termination has to be keyed twice, and the two systems start to disagree about who is active and where the cost lands.

Stacksync syncs Account Service, Usage, Invoice, Payment in Logisense with Positions, Departments (Organizations), Locations, Grades and Salaries in Oracle Fusion Cloud HCM bi-directionally and in real time. A person added, updated, or deactivated on either side appears on the other within seconds, with field-level mapping and conflict resolution in place of CSV exports and nightly batch jobs.

That matters most when money follows a people event. A hire that finance can pay, a leaver whose access ends, a transfer that redirects cost to the right team, all happen from one change instead of two, so headcount and spend reconcile from the same set of records.

Common use cases

  • 01 Stream Usage records from a warehouse or product event pipeline into LogiSense for rating and usage-based Invoices.
  • 02 Act on Payment Status Updated webhooks to update entitlements or dunning status in an operational database in near real time.
  • 03 Keep Positions and Departments aligned between Oracle HCM and a finance/ERP system so cost centers and reporting structures match.
  • 04 Sync Absences (workerAbsenceEntries) into a scheduling or workforce-management database for coverage planning.

Common sync patterns

People-driven costs land in finance

Compensation, reimbursements, or other costs tied to a person on the Oracle Fusion Cloud HCM side flow into Logisense for posting, so the books reflect what people actually cost without manual re-entry.

New person becomes a known record in finance

When someone is added in Oracle Fusion Cloud HCM, a matching employee or payee record appears in Logisense, ready for payroll, expenses, or cost allocation without anyone rekeying the details.

One employee identity

A person's name, ID, or contact details corrected in either system update the other, so finance and HR reference the same person instead of maintaining two versions.

What you can sync between Logisense and Oracle Fusion Cloud HCM

Representative objects on each side — any object or custom field can map to any target. Schemas are auto-detected; types are converted between the two systems.

Logisense objects Oracle Fusion Cloud HCM objects How this pairing syncs
Package and Service Product catalog of offerings and their chargeable services (one-time, recurring, usage-based); read for reporting or written from a catalog source. Locations Physical work locations referenced by assignments; synced so downstream provisioning and directory tools resolve the same location codes. Package and Service is specific to Logisense and Locations to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.
Account Service Billable line item of a Package assigned to an account; written when provisioning or changing a subscription, read for entitlement checks. Grades and Salaries Grade, grade-rate, and worker compensation records; usually read out for compensation and headcount analytics, and written back for corrections. Account Service is specific to Logisense and Grades and Salaries to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.
Usage Metered usage records fed to the rating engine and classified by Usage Class and Unit; written in from product or warehouse event data. Absences (workerAbsenceEntries) Time-off and leave entries; synced into scheduling or workforce-management databases for coverage planning. Usage is specific to Logisense and Absences (workerAbsenceEntries) to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.
Invoice Generated billing documents with items, history, and status; typically read out to ERPs and warehouses for finance and reconciliation. Workers (publicWorkers) Person master with personNumber, names, national IDs, and work relationships; synced two-way via the /workers resource, which replaced the desupported /emps resource. Invoice is specific to Logisense and Workers (publicWorkers) to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.
Payment Payment records whose status changes emit webhooks; read for cash reconciliation and to drive dunning and provisioning workflows. Assignments Child of a worker's work relationship carrying job, position, department, location, grade, and manager; effective-dated, so writes go through PATCH with an effective date. Payment is specific to Logisense and Assignments to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.
Extension Attribute Custom fields on entities via Extension/Attribute/Entity; discoverable so field mappings extend to org-specific data. Jobs Job catalog reference data; commonly read out to align titles and job codes in a warehouse or written to keep downstream systems consistent. Extension Attribute is specific to Logisense and Jobs to Oracle Fusion Cloud HCM — each maps to any object or custom field on the other side.

How changes propagate between Logisense and Oracle Fusion Cloud HCM

Each direction of the sync is driven by what the source system can signal and what the destination accepts — detection, delivery, and expected latency below.

Logisense Oracle Fusion Cloud HCM Sub-second propagation

DetectionLogisense notifies Stacksync of record changes through webhook events. Webhook event subscriptions push near-real-time notifications on record status changes (e.g.

DeliveryEach detected change is written to Oracle Fusion Cloud HCM through its API, with automatic retries and rate-limit backoff.

Oracle Fusion Cloud HCM Logisense Sub-second propagation

DetectionChanges in Oracle Fusion Cloud HCM are captured at the source via change data capture — no polling loop against its API. Atom feeds expose changes-only feeds for key events (new hire, termination, assignment change).

DeliveryEach detected change is written to Logisense through its API, with automatic retries and rate-limit backoff.

Rate-limit considerations

  • Logisense: No publicly documented fixed request cap; JWT access tokens are short-lived, and high-volume usage is ingested through mediation feeds rather than per-record API writes.
  • Oracle Fusion Cloud HCM: Oracle publishes no fixed per-tenant REST rate limit; pages are capped via limit/offset and Oracle recommends client-side throttling, backoff, and using HDL for mass loads rather than transactional REST.
What ships with Logisense ⇄ Oracle Fusion Cloud HCM

Connect Logisense and Oracle Fusion Cloud HCM for flexible, real-time data sync.

Real-time sync, workflow automation, event queues, EDI, and monitoring, for every Logisense–Oracle Fusion Cloud HCM connection.

Real-time

Two-way sync

Changes in Logisense or Oracle Fusion Cloud HCM instantly reflect in both systems. No stale data, no manual imports.

No-code + pro-code

Workflow automation

Trigger automated workflows whenever Logisense or Oracle Fusion Cloud HCM data changes, update records, fire webhooks, or kick off sequences without brittle API scripts.

At scale

Event queues

Handle millions of events per minute without losing a single Logisense or Oracle Fusion Cloud HCM record.

Observability

Monitoring

Track your Logisense ⇄ Oracle Fusion Cloud HCM sync health, view errors, and replay failed events in one click.

Trading partners

EDI

Transform legacy EDI complexity into simple database interactions between Logisense and Oracle Fusion Cloud HCM.

How the Logisense and Oracle Fusion Cloud HCM connectors work

Logisense

Integration surface
REST API (versioned, e.g. v9/v10)
Authentication
JSON Web Token (JWT) bearer tokens obtained via the API and refreshed before expiry
Change detection
Webhook event subscriptions push near-real-time notifications on record status changes (e.g. Payment Status Updated), with a Webhook Monitor for retries; entities without webhook coverage are polled via filtered REST queries
Capabilities
read · write · webhooks
Rate limits
No publicly documented fixed request cap; JWT access tokens are short-lived, and high-volume usage is ingested through mediation feeds rather than per-record API writes.
Logisense setup guide

Oracle Fusion Cloud HCM

Integration surface
REST API (/hcmRestApi/resources), Atom feeds, and HCM Data Loader (HDL) for bulk
Authentication
OAuth 2.0 bearer tokens via Oracle Identity Cloud Service (IDCS/IAM); HTTP Basic and SAML/JWT bearer over SSL are also accepted, enforced by Oracle Web Services Manager (OWSM)
Change detection
Atom feeds expose changes-only feeds for key events (new hire, termination, assignment change); REST q= filters on LastUpdateDate and HCM Extract in incremental mode cover broader deltas
Capabilities
read · write · CDC
Rate limits
Oracle publishes no fixed per-tenant REST rate limit; pages are capped via limit/offset and Oracle recommends client-side throttling, backoff, and using HDL for mass loads rather than transactional REST.
How it works

How to connect Logisense to Oracle Fusion Cloud HCM — three steps, no code

Configure and sync within minutes, no code. Whether you sync 50k or 100M+ records, Stacksync handles the queues, infra, and plumbing. Integrations are non-invasive and need zero setup on your systems.

  1. 01

    Connect your apps

    Authenticate Logisense and Oracle Fusion Cloud HCM with each platform's native method — OAuth, API keys, or service accounts — plus secure options like SSH tunneling, IP whitelisting, and VPC peering.

    • OAuth 2.0
    • SSH tunnel
    • VPC peering
    Logisense connected
    Oracle Fusion Cloud HCM connected
    OAuth 2.0
    SSH tunnel
    SSL certificate
    VPC peering
  2. 02

    Choose tables

    Pick the Logisense and Oracle Fusion Cloud HCM objects to sync — Stacksync auto-detects both schemas, including custom fields where the platform exposes them. Sync to existing tables, or let Stacksync create new ones with ideal data types.

    • Standard objects
    • Custom objects
    • Auto-schema
    objects · Logisense ⇄ Oracle Fusion Cloud HCM
    Customers 12,480
    Sales Orders 8,213
    Invoices 5,902
    Items 1,344
  3. 03

    Map fields

    Fields map automatically even when names and types differ. Stacksync handles transformation and type casting for you, zero configuration required.

    • Auto-map
    • Type casting
    • Transforms
    Logisense Oracle Fusion Cloud HCM
    Company company_name text
    Email email text
    Amount amount numeric
    Created created_at timestamp
Try interactive demo
FAQ

Logisense and Oracle Fusion Cloud HCM integration FAQ

SECURITY

Security teams trust Stacksync

As a data company, we understand the importance of keeping your data secure. Stacksync is built with security best practices to keep your data safe at every layer, and is DPF-certified for US, EU, UK and CH data transfers.

Learn more about security
SOC 2 Type II
ISO 27001
HIPAA BAA
GDPR
CCPA
DPF US-EU-UK-CH
→ SECURITY WITH BENEFITS

SSO & SCIM

Let your users access Stacksync from your centralized user management systems. Works with Okta, Azure, Google SSO and more.

Alerts

Immediately get alerted about record syncing issues over email, Slack, PagerDuty and WhatsApp. Resolve issues from a centralized dashboard with retry and revert options.

Secure connection options

Securely connects to your systems with:

OAuth 2 SSH Tunnelling SSL certificates IP Whitelisting VPN gateway VPC peering and more

Related integrations

Every pair below is a real-time, two-way sync. Search all 398 integrations available for Logisense and Oracle Fusion Cloud HCM.

Popular · 7 of 398
All Logisense integrations All Oracle Fusion Cloud HCM integrations Browse all integrations
Coworkers laughing in front of a laptop in a casual office setting

Your last integration took months.
Your next one takes a prompt.

Book a demo Tour the platform on your own