Skip to content
Accounting and finance ⇄ Human resources

Hyperline to Lever integration — real-time, two-way sync

Keep Hyperline and Lever in sync without custom scripts. Cut weeks of integration work, eliminate silent data drift, and give your team a single, reliable source of truth.

  • SOC 2 and 6 other compliance frameworks
  • POC with real engineers in minutes

Adopted by fast-scaling companies moving mission-critical data in real time

Case study
Migrated from MuleSoft
Case study
Migrated from Celigo
Migrated from Heroku Connect
Migrated from Matillion
Case study
Migrated from Fivetran
Case study
Migrated from Celigo
Why teams connect Hyperline and Lever

Keep the employee, department, and cost records that Hyperline and Lever share consistent in real time, so the finance system and the people system stop drifting apart.

Hyperline runs the money side of the company: who gets paid, what it costs, and which part of the business the cost belongs to. Lever runs the people side: who works here, which team they sit in, and how their employment changes over time. The two overlap on the same people and the same org structure, because every employee is also a payee and every department is also a cost center. When that overlap is maintained by hand, a new hire, a transfer, or a termination has to be keyed twice, and the two systems start to disagree about who is active and where the cost lands.

Stacksync syncs Products / prices, Invoices, Payments, Billable events in Hyperline with Offers, Users, Stages, Feedback in Lever bi-directionally and in real time. A person added, updated, or deactivated on either side appears on the other within seconds, with field-level mapping and conflict resolution in place of CSV exports and nightly batch jobs.

That matters most when money follows a people event. A hire that finance can pay, a leaver whose access ends, a transfer that redirects cost to the right team, all happen from one change instead of two, so headcount and spend reconcile from the same set of records.

Common use cases

  • 01 Sync invoices and payments into a data warehouse or accounting system for revenue reporting and reconciliation.
  • 02 Keep plan and entitlement state consistent between Hyperline and the application database that enforces feature access.
  • 03 Push Postings and Requisitions into an HRIS or warehouse to reconcile approved headcount against open roles.
  • 04 When an Opportunity is marked hired, write the candidate and its Offer into an HRIS or onboarding system to start employee provisioning.

Common sync patterns

People-driven costs land in finance

Compensation, reimbursements, or other costs tied to a person on the Lever side flow into Hyperline for posting, so the books reflect what people actually cost without manual re-entry.

New person becomes a known record in finance

When someone is added in Lever, a matching employee or payee record appears in Hyperline, ready for payroll, expenses, or cost allocation without anyone rekeying the details.

One employee identity

A person's name, ID, or contact details corrected in either system update the other, so finance and HR reference the same person instead of maintaining two versions.

What you can sync between Hyperline and Lever

Representative objects on each side — any object or custom field can map to any target. Schemas are auto-detected; types are converted between the two systems.

Hyperline objects Lever objects How this pairing syncs
Payments Settlement records used to reconcile revenue against invoices. Postings Job posting records with categories, apply URLs, workplace type, and requisition codes. Can be created via POST /postings and read into a warehouse for open-role reporting. Payments is specific to Hyperline and Postings to Lever — each maps to any object or custom field on the other side.
Billable events Metered consumption events ingested to drive usage-based charges. Requisitions Headcount/requisition records with custom requisition fields, tied to Postings; read via GET /requisitions and synced to an HRIS to reconcile approved headcount against open roles. Billable events is specific to Hyperline and Requisitions to Lever — each maps to any object or custom field on the other side.
Credit notes Adjustments and refunds synced for accurate revenue reporting. Offers Offer records attached to an Opportunity with status and offer-form fields; exposed read-only through GET /opportunities/:id/offers, so they sync outbound to an HRIS or onboarding system when a candidate reaches the offer stage. Credit notes is specific to Hyperline and Offers to Lever — each maps to any object or custom field on the other side.
Customers Billing accounts that syncs match against CRM and product records. Users Lever team members (recruiters, hiring managers) with configurable roles; can be created via POST /users, deactivated, and reactivated through the API. Customers is specific to Hyperline and Users to Lever — each maps to any object or custom field on the other side.
Subscriptions Active plans and their lifecycle state, synced to show billing status elsewhere. Stages Pipeline stage definitions that Opportunities move through; read to model funnel state and stage transitions in a database. Subscriptions is specific to Hyperline and Stages to Lever — each maps to any object or custom field on the other side.
Products / prices The catalog of products and price configurations referenced by subscriptions. Feedback Interview feedback and scorecard forms attached to Opportunities; created via POST /opportunities/:id/feedback and consolidated into a warehouse for interviewer analytics. Products / prices is specific to Hyperline and Feedback to Lever — each maps to any object or custom field on the other side.

How changes propagate between Hyperline and Lever

Each direction of the sync is driven by what the source system can signal and what the destination accepts — detection, delivery, and expected latency below.

Hyperline Lever Sub-second propagation

DetectionHyperline notifies Stacksync of record changes through webhook events. Webhooks for billing events, with polling as a fallback.

DeliveryEach detected change is written to Lever through its API, with automatic retries and rate-limit backoff.

Lever Hyperline Sub-second propagation

DetectionLever notifies Stacksync of record changes through webhook events. Webhooks for candidate and application lifecycle events (applicationCreated, candidateStageChange, candidateArchiveStateChange, candidateHired,.

DeliveryEach detected change is written to Hyperline through its API, with automatic retries and rate-limit backoff.

Rate-limit considerations

  • Hyperline: Subject to the platform's API rate limits.
  • Lever: 10 requests/second per API key with a token-bucket burst to ~20/s; POSTs that create candidates/applications are throttled to roughly 2/second. Sustained overage returns 429 with Retry-After. List endpoints are cursor-paginated at up to 100 records per page.
What ships with Hyperline ⇄ Lever

Connect Hyperline and Lever for flexible, real-time data sync.

Real-time sync, workflow automation, event queues, EDI, and monitoring, for every Hyperline–Lever connection.

Real-time

Two-way sync

Changes in Hyperline or Lever instantly reflect in both systems. No stale data, no manual imports.

No-code + pro-code

Workflow automation

Trigger automated workflows whenever Hyperline or Lever data changes, update records, fire webhooks, or kick off sequences without brittle API scripts.

At scale

Event queues

Handle millions of events per minute without losing a single Hyperline or Lever record.

Observability

Monitoring

Track your Hyperline ⇄ Lever sync health, view errors, and replay failed events in one click.

Trading partners

EDI

Transform legacy EDI complexity into simple database interactions between Hyperline and Lever.

How the Hyperline and Lever connectors work

Hyperline

Integration surface
REST API
Authentication
API key (bearer token)
Change detection
Webhooks for billing events, with polling as a fallback
Capabilities
read · write · webhooks
Rate limits
Subject to the platform's API rate limits.

Lever

Integration surface
REST Data API (api.lever.co/v1)
Authentication
API key over HTTP Basic auth (key as username, blank password) for internal integrations, or OAuth 2.0 with 1-hour access tokens for partner integrations (auth.lever.co)
Change detection
Webhooks for candidate and application lifecycle events (applicationCreated, candidateStageChange, candidateArchiveStateChange, candidateHired, interview created/updated/deleted), plus incremental polling via created_at and updated_at range filters on Opportunities
Capabilities
read · write · webhooks
Rate limits
10 requests/second per API key with a token-bucket burst to ~20/s; POSTs that create candidates/applications are throttled to roughly 2/second. Sustained overage returns 429 with Retry-After. List endpoints are cursor-paginated at up to 100 records per page.
Lever setup guide
How it works

How to connect Hyperline to Lever — three steps, no code

Configure and sync within minutes, no code. Whether you sync 50k or 100M+ records, Stacksync handles the queues, infra, and plumbing. Integrations are non-invasive and need zero setup on your systems.

  1. 01

    Connect your apps

    Authenticate Hyperline and Lever with each platform's native method — OAuth, API keys, or service accounts — plus secure options like SSH tunneling, IP whitelisting, and VPC peering.

    • OAuth 2.0
    • SSH tunnel
    • VPC peering
    Hyperline connected
    Lever connected
    OAuth 2.0
    SSH tunnel
    SSL certificate
    VPC peering
  2. 02

    Choose tables

    Pick the Hyperline and Lever objects to sync — Stacksync auto-detects both schemas, including custom fields where the platform exposes them. Sync to existing tables, or let Stacksync create new ones with ideal data types.

    • Standard objects
    • Custom objects
    • Auto-schema
    objects · Hyperline ⇄ Lever
    Customers 12,480
    Sales Orders 8,213
    Invoices 5,902
    Items 1,344
  3. 03

    Map fields

    Fields map automatically even when names and types differ. Stacksync handles transformation and type casting for you, zero configuration required.

    • Auto-map
    • Type casting
    • Transforms
    Hyperline Lever
    Company company_name text
    Email email text
    Amount amount numeric
    Created created_at timestamp
Try interactive demo
FAQ

Hyperline and Lever integration FAQ

SECURITY

Security teams trust Stacksync

As a data company, we understand the importance of keeping your data secure. Stacksync is built with security best practices to keep your data safe at every layer, and is DPF-certified for US, EU, UK and CH data transfers.

Learn more about security
SOC 2 Type II
ISO 27001
HIPAA BAA
GDPR
CCPA
DPF US-EU-UK-CH
→ SECURITY WITH BENEFITS

SSO & SCIM

Let your users access Stacksync from your centralized user management systems. Works with Okta, Azure, Google SSO and more.

Alerts

Immediately get alerted about record syncing issues over email, Slack, PagerDuty and WhatsApp. Resolve issues from a centralized dashboard with retry and revert options.

Secure connection options

Securely connects to your systems with:

OAuth 2 SSH Tunnelling SSL certificates IP Whitelisting VPN gateway VPC peering and more

Related integrations

Every pair below is a real-time, two-way sync. Search all 411 integrations available for Hyperline and Lever.

Popular · 7 of 411
All Hyperline integrations All Lever integrations Browse all integrations
Coworkers laughing in front of a laptop in a casual office setting

Your last integration took months.
Your next one takes a prompt.

Book a demo Tour the platform on your own