Can Amazon SES and Microsoft Graph sync in both directions?

Confirm two-way support with Stacksync for the records and fields you need in both systems. Access to a vendor API does not confirm that its Stacksync connector supports write-back.

How fast does the Amazon SES to Microsoft Graph sync run?

Measure initial-load and ongoing-change latency separately. Source detection, selected objects, account limits, and destination validation determine the observed delay.

Will existing duplicates merge automatically?

No. Stacksync documents that pre-existing duplicates are not merged automatically when two-way sync begins. Review the initial dataset and matching plan before enabling it; an empty destination can simplify the first load.

How do I map Amazon SES fields to Microsoft Graph?

Start with one business entity and a stable record ID. Map a small set of editable fields with compatible types, test required values and relationships, then expand after the pilot passes.

What should I do if a record fails to sync?

Check the destination error, field constraints, permissions, and current source value. The Stacksync issues dashboard supports retry and revert; retry reads current source values, so verify the intended record state before acting.

What does a Amazon SES and Microsoft Graph integration cost?

Use the current Stacksync pricing page and confirm the supported implementation with the team. Scope the required objects, record volume, update frequency, initial load, and support needs when comparing a managed connector with native or custom development.

Which records should the Amazon SES and Microsoft Graph pilot start with?

Start by reviewing Messages (SendEmail / SendBulkEmail) in Amazon SES and Mail messages (Outlook) in Microsoft Graph. Check how these records relate in your workflow, then confirm the actual fields and supported operations. Test record matching and one failed or repeated update before adding more records.

What should be ready before the Amazon SES and Microsoft Graph initial load?

Prepare both accounts, the selected object schemas, stable source and destination IDs, and the expected outcome. Identify the Amazon SES account, edition, environment, and business objects the integration must access. Identify the Microsoft Graph account, edition, environment, and business objects the integration must access. Use the pair worksheet to record ownership and acceptance criteria.

Communications / Developer tools

Amazon SES and Microsoft Graph integration

Plan how Amazon SES and Microsoft Graph should share data across your business. Work with Stacksync engineers on record mapping, system access, and the requirements for running the integration.

Scope your workflow with an integration engineer
Review the systems, records, and updates you need

Integration planning

stacksync.com

Amazon SES

Microsoft Graph

Review the integration scope

Teams building with Stacksync

Plan the connection your business needs

Explore a Amazon SES and Microsoft Graph integration with a Stacksync engineer. Stacksync support for Amazon SES and Microsoft Graph is not established by the connector documentation reviewed for this page. Start with one record and the update your business needs to identify an implementation path.

01 / Business process

Start with one meaningful update

Identify the record that changes in Amazon SES or Microsoft Graph, where it needs to appear, and which team depends on it.

02 / Data access

Establish the available connection

Bring the objects, account editions, and required directions. An engineer can review the connector path, permissions, and field access.

03 / Success criteria

Define a result you can verify

Agree on record matching, acceptable delay, expected volume, and how your team will resolve failed updates.

Explore the technical references

Technical referenceAvailable documentation, candidate record relationships, and questions for your technical review.

What records can you sync?

Explore the record types and read/write requirements for each system.

Amazon SESConnection and object support require review

Record types to review with Stacksync

Record type	Coverage and requirements
Messages (SendEmail / SendBulkEmail)	Confirm support for this record type and the direction you need.
Contacts	Confirm support for this record type and the direction you need.
Contact Lists	Confirm support for this record type and the direction you need.
Email Templates	Confirm support for this record type and the direction you need.
Suppression List	Confirm support for this record type and the direction you need.
Verified Identities	Confirm support for this record type and the direction you need.

Discuss Amazon SES requirements

Microsoft GraphConnection and object support require review

Record types to review with Stacksync

Record type	Coverage and requirements
Users	Confirm support for this record type and the direction you need.
Groups and memberships	Confirm support for this record type and the direction you need.
Mail messages (Outlook)	Confirm support for this record type and the direction you need.
Calendar events	Confirm support for this record type and the direction you need.
Contacts	Confirm support for this record type and the direction you need.
Drive items (OneDrive & SharePoint)	Confirm support for this record type and the direction you need.

Discuss Microsoft Graph requirements

Connection requirements and limits

Amazon SES

Integration interface: AWS SES API v2 (REST/JSON over HTTPS) plus an SMTP sending interface
Authentication: Confirm the credentials, API plan, and permissions required for Amazon SES.
Change detection: Confirm how Stacksync detects changes for this connector and the objects you need.
Read access: Confirm with Stacksync
Write access: Confirm with Stacksync

Limitations to check

Confirm Stacksync support for Amazon SES and the record types your workflow needs.
Review write-back, deletion handling, update timing, and account limits with the integration team.

Microsoft Graph

Integration interface: Microsoft Graph unified REST API (v1.0 and beta) at graph.microsoft.com, spanning Microsoft 365 services — Entra ID, Outlook mail and calendar, OneDrive and SharePoint, Teams, and Planner; supports JSON $batch (up to 20 requests per call).
Authentication: Confirm the credentials, API plan, and permissions required for Microsoft Graph.
Change detection: Confirm how Stacksync detects changes for this connector and the objects you need.
Read access: Confirm with Stacksync
Write access: Confirm with Stacksync

Limitations to check

Confirm Stacksync support for Microsoft Graph and the record types your workflow needs.
Review write-back, deletion handling, update timing, and account limits with the integration team.

Prepare your technical review

Use the worksheets and reference checks to capture record identity, ownership, and the result your business expects.

Implementation reference

Record identity and field ownership

Use these data-model references to describe the records your connection needs. They are planning examples; connector availability and supported operations must be established before implementation.

Download the mapping worksheet

CSV · No email required · Record matching, ownership, and test cases

Record matchingMessages (SendEmail / SendBulkEmail) Mail messages (Outlook)

Compare whether Amazon SES Messages (SendEmail / SendBulkEmail) and Microsoft Graph Mail messages (Outlook) describe the same message or conversation in your business.

Amazon SES: Object support to establish
Microsoft Graph: Object support to establish

Record identity

Retain message ID, conversation/thread ID, channel, and sender identity.

Field ownership

Separate message history from actions that send new messages; preserve private/public visibility and channel consent.

Fields to include

Source message ID
Thread reference
Delivery state
Timestamp
Related record ID

Record matchingContacts Contacts

Compare whether Amazon SES Contacts and Microsoft Graph Contacts describe the same contact in your business.

Amazon SES: Object support to establish
Microsoft Graph: Object support to establish

Record identity

Use a stable person/contact ID and an explicit cross-system lookup. Email can change and can be shared, so treat it as a matching clue rather than a universal key.

Field ownership

Keep consent and communication preferences under an agreed authority; a general contact update must not silently resubscribe someone.

Fields to include

Source person ID
Display name
Email address
Organization reference
Consent state

Architecture decision

Choose how to connect your systems

Choose a method around one example record and the update your business needs. Use Messages (SendEmail / SendBulkEmail) / Mail messages (Outlook) to review record matching and confirm Stacksync support for the required operations. Compare ongoing sync, a custom workflow, and a scheduled export against that requirement.

Stacksync managed sync

Best fit: Review compatibility with a Stacksync engineer using an example of the records and updates you need.
Operating responsibility: Fits ongoing record synchronization when the required operations are supported. Add workflow steps for approvals or business actions that go beyond copying fields.
Before you choose: Check record matching: Retain message ID, conversation/thread ID, channel, and sender identity. Verify field coverage, deletion handling, and how changes are detected.

Native vendor integration

Best fit: A vendor-built integration may fit if it supports your Amazon SES and Microsoft Graph record types.
Operating responsibility: Can reduce setup for a supported workflow. You may need another method for records or business steps it does not cover.
Before you choose: First check whether either vendor offers this integration. If available, verify Messages (SendEmail / SendBulkEmail) / Mail messages (Outlook), update direction, account tier, and related-record handling.

Custom API or workflow

Best fit: Consider when Amazon SES and Microsoft Graph need a transformation, approval, or action outside a direct record sync.
Operating responsibility: Provides control over business steps; the team owns credentials, version changes, error queues, and reconciliation.
Before you choose: Verify endpoint permissions, pagination, quotas, duplicate detection, and failure recovery. Separate reading history from actions that send messages, grant access, or post transactions.

File or scheduled snapshot

Best fit: Consider for a one-time Amazon SES / Microsoft Graph migration or a reporting need with an explicit freshness window.
Operating responsibility: Can simplify a bounded transfer; later changes and deletion history require another extraction or a separately designed incremental process.
Before you choose: Record the extraction cutoff, source IDs, encoding, date/number formats, and reconciliation totals.

Workflow reference

From a business event to the right update

Open a workflow to see its trigger, record relationships, and expected result.

Message or conversation sync test

Starting event: A change to the selected Messages (SendEmail / SendBulkEmail) or Mail messages (Outlook) record needs a defined result in the other system.

Start with Amazon SES Messages (SendEmail / SendBulkEmail) and Microsoft Graph Mail messages (Outlook). Use the record-matching and field-ownership rules from your mapping worksheet.
Resolve conversation, participant, and customer context before associating messages.
Test a normal update and one failed or repeated update in the supported direction. Keep both record IDs with the test results.

Expected result: Test a delivery-state change, repeated message, private conversation, and reply linked to the correct thread.

If it fails: Check provider delivery state before retrying a send; replaying history must not send the message again.

Contact sync test

Starting event: A change to the selected Contacts or Contacts record needs a defined result in the other system.

Start with Amazon SES Contacts and Microsoft Graph Contacts. Use the record-matching and field-ownership rules from your mapping worksheet.
Resolve the organization relationship and any owner or consent references required by the destination.
Test a normal update and one failed or repeated update in the supported direction. Keep both record IDs with the test results.

Expected result: Test an email change, two records sharing an email, and a person associated with multiple organizations.

If it fails: Hold ambiguous matches for review and reconcile the person ID before retrying; preserve the consent decision already recorded by its owner.

Link communication history with Microsoft Graph context

Starting event: A communication in Amazon SES needs an association with Users or Groups and memberships in Microsoft Graph.

Select the communication records from Messages (SendEmail / SendBulkEmail) or Contacts and preserve message/call and thread IDs.
Resolve the participant-to-business-record relationship explicitly; phone number or display name alone may be ambiguous.
Keep history replication separate from sending a message, placing a call, or changing consent. Confirm a separate authorized operation for any action.

Expected result: Repeated delivery updates the same history record; a private conversation stays private; a history replay sends no new message.

If it fails: Check source delivery state and the destination relationship before retrying. Do not resend to repair an analytical or history discrepancy.

Start with the failed record and the destination error, then inspect the source value, field requirements, and access.

Rejected or repeated message or conversation change

Investigate

Inspect Amazon SES Messages (SendEmail / SendBulkEmail) and Microsoft Graph Mail messages (Outlook), their IDs, and the destination error.

Next action

Check provider delivery state before retrying a send; replaying history must not send the message again.

Rejected or repeated contact change

Investigate

Inspect Amazon SES Contacts and Microsoft Graph Contacts, their IDs, and the destination error.

Next action

Hold ambiguous matches for review and reconcile the person ID before retrying; preserve the consent decision already recorded by its owner.

A record type or update is unavailable

Investigate

Check the Amazon SES and Microsoft Graph connector guides, account permissions, and any operations marked On Request.

Next action

Ask the integration team to confirm a supported way to handle that record. Verify whether it needs connector configuration or a separate workflow step.

Source and destination disagree after a retry

Investigate

Compare current source values, destination validation, identity mappings, and any side effects already completed.

Next action

Stacksync issue retry reads the current source state. Decide the intended state before retrying or reverting; reconcile downstream effects separately.

Read the Stacksync issues dashboard guide for retry and revert behavior.

How updates move between Amazon SES and Microsoft Graph

See how each system detects changes and which updates the other system can receive. Each direction has its own permissions and record requirements.

Amazon SES Microsoft Graph Direction requires confirmation

Detect changesConfirm how Stacksync detects changes for this connector and the objects you need.

Apply updatesConfirm that Stacksync can create or update the records you need in Microsoft Graph.

Microsoft Graph Amazon SES Direction requires confirmation

Detect changesConfirm how Stacksync detects changes for this connector and the objects you need.

Apply updatesConfirm that Stacksync can create or update the records you need in Amazon SES.

Update timing and record limits

Measure initial-load and ongoing-change latency separately. Source detection, selected objects, account limits, and destination validation determine the observed delay.
Review write-back, deletion handling, update timing, and account limits with the integration team.
Review write-back, deletion handling, update timing, and account limits with the integration team.

Prepare Amazon SES and Microsoft Graph access

Set up both accounts before testing the mapping. Use test records where available, and identify the account administrator who can approve access and help resolve setup errors.

Amazon SES setup checklist

Identify the Amazon SES account, edition, environment, and business objects the integration must access.
Confirm a Stacksync connector or implementation path for Amazon SES, including read/write support, authentication, and initial-load limits.

Microsoft Graph setup checklist

Identify the Microsoft Graph account, edition, environment, and business objects the integration must access.
Confirm a Stacksync connector or implementation path for Microsoft Graph, including read/write support, authentication, and initial-load limits.

Prepare to go live

Record the fields each system can update, the first-load cutoff, both record IDs, the expected update delay, and who handles errors. Complete the tests before production before expanding to more records.

Use the Amazon SES and Microsoft Graph planning worksheet to capture these decisions. Record the access owner in the worksheet and enter credentials only in the connection setup.

Talk to an engineer · Review current pricing

Security and control for your integrations

Use SSO and SCIM to manage access, secure connection options to reach your systems, and record-level retry and revert controls to resolve sync errors.

Explore security controls

FAQ