Skip to content
X12 EDI

E2open, LLC X12 204 Motor Carrier Load Tender

X12 204 (Motor Carrier Load Tender) is the EDI transaction exchanged between E2open, LLC (Nouryon (via E2open)) and its trading partners. Stacksync handles full compliance, mapping, and real-time delivery.

Segments
26
Loops
7
X12 204
All partners ↗

Transaction context

Where 204 Motor Carrier Load Tender fits on Nouryon (via E2open)

On Nouryon (via E2open), the X12 204 Motor Carrier Load Tender precedes the 990 Response To A Load Tender, 214 Transportation Carrier Shipment Status Message and 210 Motor Carrier Freight Details And Invoice in the Logistics cycle.

E2open, LLC channels
37 of 37

37 of E2open, LLC's 37 channels carry 204

Trading partners
386

partners across the Stacksync network trade 204

Channels
534

channels network-wide carry 204

On E2open, 204 runs on 41 channels.

The 204 carries a shipper's or broker's offer of a truckload shipment to a motor carrier, including pickup and delivery scheduling, stop-off details, equipment requirements, commodities, and shipping instructions. It opens the routing-guide tender cycle: the carrier answers with a 990 Response to Load Tender, then reports movement on 214 status messages and bills on a 210 freight invoice. Trading partners require it because dispatch, tracking, and freight-pay matching all key off the tender's reference numbers. A shipper, freight broker, or 3PL responsible for contracting the move sends the 204 to a full-truckload motor carrier.

When it fires: A shipper's TMS plans a truckload and tenders it to the next carrier in the routing guide, requesting acceptance before the stated respond-by time.

Common 204 rejection causes
  • Missing or wrong mandatory header data: ST, B2, and B2A are must-use segments, and an incorrect Standard Carrier Alpha Code in B2 routes the tender to the wrong carrier or fails validation.
  • Slow or missing 990 responses: shippers expect acceptance or rejection within a defined window (the header G62 carries the must-respond-by date and time), and late answers damage the carrier's standing with the shipper.
  • Stop-level weight reconciliation failures: totals in the stop-off AT8 segment (loop 0300) must equal the accumulated commodity-level AT8 amounts (loop 0320), and mismatches break rating and downstream invoice audit.
  • Loop misuse: specifications require the LAD lading detail and G62 dates in either loop 0300 or loop 0350, not both, and order-level detail sent in the wrong loop fails partner validation.

Specification summary

X12 204 Motor Carrier Load Tender at the element level

The X12 204 specification defines 82 segments carrying 470 data elements, 63 of which are mandatory.

Segments
82
Data elements
470
Mandatory elements
63
Segments with mandatory elements
Segment Elements Mandatory
B2 12 1
B2A 2 1
MS3 5 2
PLD 4 1
NTE 2 1
N1 6 1
N2 2 1
N3 2 1
G61 5 2
N7 24 1
M7 5 1
S5 11 2
Key identifiers in 204
  • Shipment Method of Payment
  • Transaction Set Purpose Code
  • Standard Carrier Alpha Code
  • Routing Sequence Code
  • Quantity of Pallets Shipped
  • Description
  • Entity Identifier Code
  • Name
Full segment guideline — 26 segments 7 loops · X12 204 Motor Carrier Load Tender
ISA Interchange Control Header 16 elements

To start and identify an interchange of zero or more functional groups and interchange-related control segments

GS Functional Group Header 8 elements

To indicate the beginning of a functional group and to provide control information

ST Transaction Set Header 2 elements

To indicate the start of a transaction set and to assign a control number

B2 Beginning Segment for Shipment Information Transaction 3 elements

To transmit basic data relating to shipment information

B2A Set Purpose 2 elements

To allow for positive identification of transaction set purpose

L11 Business Instructions and Reference Number 2 elements

To specify instructions in this business relationship or a reference number

G62 Date/Time 5 elements

To specify pertinent dates and times

MS3 Interline Information 4 elements

To identify the interline carrier and relevant data

AT5 Bill of Lading Handling Requirements 2 elements

To identify Bill of Lading handling and service requirements

PLD Pallet Information 1 element

To specify pallet information including quantity, exchange, and weight

NTE Note/Special Instruction 2 elements

To transmit information in a free-form format, if necessary, for comment or special instruction

N1 Loop Repeat: 5
N1 Name 4 elements

To identify a party by type of organization, name, and code

N3 Address Information 2 elements

To specify the location of the named party

N4 Geographic Location 4 elements

To specify the geographic place of the named party

G61 Contact 4 elements

To identify a person or office to whom communications should be directed

N7 Loop Repeat: 10
N7 Equipment Details 7 elements

To identify the equipment

MEA Measurements 6 elements

To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

S5 Loop Repeat: 999
S5 Stop Off Details 10 elements

To specify stop-off detail reference numbers and stop reason

AT8 Shipment Weight, Packaging and Quantity Data 7 elements

To specify shipment details in terms of weight, and quantity of handling units

L3 Total Weight and Charges 10 elements

To specify the total shipment in terms of weight, volume, rates, charges, advances, and prepaid amounts applicable to one or more line items

SE Transaction Set Trailer 2 elements

To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)

OID Loop Repeat: 999
OID Order Identification Detail 9 elements

To specify order identification detail

L5 Loop Repeat: 99
L5 Description, Marks and Numbers 8 elements

To specify the line item in terms of description, quantity, packaging, and marks and numbers

G61 Loop Repeat: 99
LH1 Loop Repeat: 25
LH1 Hazardous Identification Information 5 elements

To specify the hazardous commodity identification reference number and quantity

LH2 Hazardous Classification Information 2 elements

To specify the hazardous notation and endorsement information

LH3 Hazardous Material Shipping Name 2 elements

To specify the hazardous material shipping name and additional descriptive requirements

Trading partners

3+ trading partners.
And every channel covered.

We connect to every major retailer, distributor, and 3PL on the EDI network. Type to search the directory, or browse the full catalogue.

E2open, LLC Nouryon (via E2open) EDI 204 FAQ

Common questions about 204 Motor Carrier Load Tender on the Nouryon (via E2open) channel.

What is X12 204 Motor Carrier Load Tender?
X12 204 (Motor Carrier Load Tender) is the EDI transaction set used to exchange motor carrier load tender data. E2open, LLC's Nouryon (via E2open) channel requires it from trading partners.
Does E2open, LLC Nouryon (via E2open) require 204 for trading partners?
Yes, E2open, LLC (Nouryon (via E2open)) supports X12 204 Motor Carrier Load Tender. Stacksync handles the full integration so your team can focus on operations.
How fast can I integrate E2open, LLC 204 with Stacksync?
Most companies go live with E2open, LLC 204 on Stacksync in days. Pre-built mappings, no-code setup, and real-time monitoring make EDI compliance straightforward.
Which other E2open, LLC channels accept 204?
X12 204 runs on 37 of E2open, LLC's 37 channels. Besides Nouryon (via E2open), it is accepted on Ruiz Foods (via E2open), Ball Corporation (via E2open), America's Logistics (Amer Serv Lines) (via E2open), JBS Swift (via E2open), Rise Baking via E2Open, Blujay Solutions TM Shippers, Chiquita (via E2open) (1425470), Schwan's (via E2open), Arkema (via E2open), AWG (via E2open), Butterball Lean (via E2open), Winona Foods LLG (via E2open), HB Fuller (via E2open) , Bar-S Foods (via E2open), Truco (UTZ Brands) (via E2open), Reyes Holdings (via E2open), CHEP (via E2open), Barilla (via E2open), Lakeview Farms (via E2open), Sargento (via E2open), Malt (via E2open), Chiquita (via E2open) (001425470), E2open (Generic Templates), Simmons (via E2open), RTP (via E2open), Exide Technologies (via E2open), Old Hickory (via E2open), Chemours (via E2open), Lindt (via E2open), Dawn Foods (via E2open), Martin Brower (via E2open), Lineage (via E2open), SiteOne (via E2open), Leprino (via E2open), Smuckers (via E2open), Blujay (formerly Kewill Transport) (via E2open). Each channel carries its own implementation guideline; Stacksync validates outbound documents against the correct guideline automatically.

Ready to automate your E2open, LLC EDI?

Most teams go live in days, not months. Talk to our team and we'll walk you through your specific setup.